the ccs-32 is a broadband, sp dt switc h designed to switc h microwave signals from a common input to either of two outpu ts. designed for 50 ohms transmission lines. the switc h is available with either failsafe or latching ty pe actuators operating on 28 vdc or other special dc voltages. the primary advantage of this switch over the miniature versions, shown on previous pages is more connector options and higher power handling cap abilit y. co mmercial ccs-32 high power dc-12ghz spdt switch failsafe typical performance specifications rf contacts: b rea k bef ore ma ke actuator v olt ag e (v dc) 20 o c 12 15 28 curren t (ma) 625 500 250 switching time: 20 msec max c onnectors : sm a, tnc , n t ype weight: 6 oz . max t emperature range: -40 o c to +65 o c (operating) shock: mil-std-202 method 213, condition d (500g non operating) vibration: mil-std-202 method 214, condition d (10g rms non operating) humidity: mois ture seal a vailable typical contact life: 5 m illion cycles rf power ha ndling sp ec ifi cation s dc-1 ghz 1-4 ghz 4-12 ghz* vswr (max) 1.25:1 1.40:1 1.70:1 insertion loss (min) 0.30 db 0.40 db 0.50 db i solat ion (max) 70 .0 db 60 .0 db 60 .0 db 3000 800 400 200 80 40 10 )sttaw( wc rewop 0.1 1.0 4.0 10 18 26.5 frequency ghz high power connectors standard n type connectors 15 25 ssol nruter 0.01 12.0 frequency ghz 0.01 frequency ghz 0.0 0.4 bd li 12.0 bd noitalosi 90 80 70 60 t el: (800) 351-7368 www.teledynecoax.com email: coax@teledyne.com specifications subject to change without notice. 10/2008 *connector type max (f) sma 12 ghz n type 11.5 ghz tnc 11 ghz
indicators ser ies connectors actuator v olt age part numbering system for ccs-32 (failsafe) ccs-32 s 1 o - t opt ions act uat or t ype connector n: n type female t: tnc female actuator voltage 1: 28vdc failsafe 2: 15vdc failsafe 3: 12vdc failsafe actuator t ype o: no indicator contacts c: indicator cont ac ts opt ions t: ttl drivers wi th diodes r: positive + common for other options cont act factory co mmercial ccs-32 high power dc-12ghz spdt switch failsafe n type outline ana log tnc outline h = 1.70 max. std model h = 2.30 max. ttl model h = 1.70 max. std model h = 2.30 max. ttl model ttl t el: (800) 351-7368 www.teledynecoax.com email: coax@teledyne.com specifications subject to change without notice. 10/2008
|
